BKPVC - ALLOY C-95200 FORGINGS
- MSDS: BKPVC
- Manufacturer: BENSALEM ALLOYS LTD
- Product Name: ALLOY C-95200 FORGINGS
- National Stock Number: 3439-00N015119
Product Identification
Product ID:ALLOY C-95200 FORGINGS
MSDS Date:01/01/1987
FSC:3439
NIIN:00N015119
MSDS Number: BKPVC
Responsible Party
BENSALEM, PA 19020
US
Emergency Phone: 215-639-2200
Info Phone: 215-639-2200
Cage: 0MCP1
Contractor
Telephone: 215-639-2200
Cage: 0MCP1
Ingredients
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 8.9%
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9192
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 88.2%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 2.9%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
FULL LENGTH FACESHIELD TO GOGGLES .
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ALUMINUM: ALUMINUM DUST/FINES AND
FUMES ARE A LOW HLTH RISK BY INHAL & ARE NORMALLY TREATED AS A
NUISANCE DUST IN NORMAL OPER (E.G. MILLING, CUTTING, GRINDING). THE
AIHA HYGIENE GUIDE LIST TOX BY INGE ST AS "NONE EXPECTED." COPPER:
MELTING,GRINDING, CUTTING OF COPPER MAY PRODUCE FUMES/DUST EXPOS
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NONE.
Effects of Overexposure:HLTH HAZ: & BRTHG THESE FUMES/DUST MAY PRESENT
POTENTIALLY SIGNIFICANT HLTH HAZ. FUMES OF COPPER MAY CAUSE METAL
FUME FEVER W/FLU-LIKE SYMP & SKIN & HAIR DISCOLORATION. WHILE
INDUSTRIAL DERMAT HAS NOT BEEN RPTD, KERATINIZATION OF HANDS &
SOLES OF FEET HAS BEEN RPTD. SYSTEMICALLY AS WELL, COPPER DUST &
FUME (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: FLUSH WELL WITH RUNNING WATER FOR AT LEAST 15 MIN TO
REMOVE PARTICULATE. GET MD. SKIN: VACUUM OFF EXCESS DUST. WASH WELL
WITH SOAP AND WATER. AVOID BLOWING PARTICULATE INTO ATMOSPHERE.
INHAL: REM OVE TO FRESH AIR. GET MD. INGEST: SEEK MED ATTN IF LRG
QUANTITIES OF MATERIAL HAVE BEEN INGESTED.
Fire Fighting
Extinguishing Media:USE SPECIAL MIXTURES OF DRY CHEMICAL OR SAND.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:SOLID, MASSIVE FORM IS NOT COMBUST. FIRE
& EXPLO HAZ ARE MOD WHEN MATL IS IN FORM OF DUST & EXPSD TO HEAT,
FLAMES, CHEM RXN, OR CONT W/POWERFUL OXIDIZERS.
Accidental Release
Spill Release Procedures:NO SPECIAL PREC ARE NEC FOR SPILLS OF BULK
MATL. IF LRG QTYS OF DUST ARE SPILLED, REMOVE BY VACUUMING OR WET
SWEEPING TO PVNT HEAVY CONC OF AIRBORNE DUST. FOLLOW FED, ST, & LOC
REGS CONCERNING DISP OF WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE MATERIAL AWAY FROM INCOMPATIBLE
MATERIALS AND KEEP DUST FROM SOURCES OF IGNITION.
Other Precautions:SEE ALL OTHER SECTIONS. USE PRECAUTIONS IN LIFTING
AND PREVENT DROPPING.
Exposure Controls
Respiratory Protection:IF EXPOSURE ABOVE THE PEL OR TLV, NIOSH/MSHA
APPROVED RESPIRATOR FOR FUME OR DUST, DEPENDENT UPON THE SOURCE OF
AIRBORNE CONTAMINANT.
Ventilation:REQUIRED IF DUST OR FUME CREATED IN HANDLING OR WORKING ON
THIS MATERIAL.
Protective Gloves:SELECT GLOVE APPRVD FOR SPECIFIC OPER.
Eye Protection:CHEM WORK GOGGLES. MAY ADD (SEE ING 4)
Other Protective Equipment:AS REQ FOR WORK DONE ON OR WITH THE METAL.
Work Hygienic Practices:AS REQ FOR WORK DONE W/FORGINGS. ALWAYS
EVALUATE JOBS DONE ON PROD I/A/W OSHA OR RELEVANT ST, FED, OR LOC
STANDARDS.
Supplemental Safety and Health
EFTS OF OVEREXP: CAUSE IRRIT OF UPPER RESP TRACT, METALLIC TASTE IN
MOUTH, & NAUS. IRON: INHAL OF IRON OXIDE FUMES/DUST MAY CAUSE AN
APPARENT BENIGN PNEUMOCONIOSIS WHICH IS CALLED SIDEROSIS. THIS DISE
ASE IS RPTD NOT TO BE DISABLING, BUT MAKES X-RAY DIAGNOSIS OF OTHER
LUNG CNDTNS DFLCT OR IMPOSSIBLE.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1550F,843C
Spec Gravity:7.5-9.0
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW SOLID WITH NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, AND OXIDIZERS.
Stability Condition to Avoid:MOLTEN METAL MAY REACT VIOLENTLY WITH
WATER.
Hazardous Decomposition Products:METAL FUME OR DUST.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS. CLEANUP PERSONNEL SHOULD WEAR NIOSH/MSHA
APPRVD RESPIRATORS AND PROTECTIVE CLOTHING.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.